Wika CPH6600 Bedienungsanleitung PDF herunterladen (Seite 16)

16 WIKA operating instructions, model CPH6600

14005103.03 11/2012 GB/D

5. Transport, packaging and storage

5.1 Transport

Check hand-held pressure calibrator for any damage that may have been caused by

transport. Obvious damage must be reported immediately.

5.2 Packaging

Do not remove packaging until just before use.

Keep the packaging as it will provide optimum protection during transport (e.g. change

in installation site, sending for repair).

5.3 Storage

Permissible conditions at the place of storage:

■

Storage temperature: -20 ... +60 °C

■

Humidity: 35 ... 85 % relative humidity (no condensation)

Avoid exposure to the following factors:

■

Direct sunlight or proximity to hot objects

■

Mechanical vibration, mechanical shock (putting it down hard)

■

Soot, vapour, dust and corrosive gases

■

Potentially explosive environments, ammable atmospheres

Store the hand-held pressure calibrator in its original packaging in a location that fulls

the conditions listed above. If the original packaging is not available, pack and store the

instrument as described below:

1. Wrap the instrument in an antistatic plastic lm.

2. Place the instrument, along with shock-absorbent material, in the packaging.

3. If stored for a prolonged period of time (more than 30 days), place a bag, containing

a desiccant, inside the packaging.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 95 96

Keine Kommentare

Wika CPH6600 Bedienungsanleitung Seite 16