Wika S-20 Bedienungsanleitung PDF herunterladen (Seite 15)

15WIKA operating instructions pressure transmitter, model S-20

14043170.02 07/2014 GB/D/F/E

4. Design and function

4.1 Description

The prevailing pressure is measured at the sensor element through the deformation of a diaphragm. By supplying

power, this deformation of the diaphragm is converted into an electrical signal. The output signal from the pressure

transmitter is amplied and standardised. The output signal is proportional to the measured pressure.

4.2 Scope of delivery

■

Pressure transmitter

■

Test report

■

Certicates (option)

■

Mating connector (option)

Cross-check scope of delivery with delivery note.

5. Transport, packaging and storage

5.1 Transport

Check the pressure transmitter for any damage that may have been caused during transportation.

Obvious damage must be reported immediately.

5.2 Packaging

Do not remove packaging until just before mounting.

Keep the packaging as it will provide optimum protection during transport (e.g. change in installation site, sending for

repair).

5.3 Storage

Permissible conditions at the place of storage:

■

Storage temperature: -40 ... +70 °C

■

Humidity: 67 % relative humidity (no condensation)

4. Design and function / 5. Transport, packaging and storage

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 95 96

Keine Kommentare

Wika S-20 Bedienungsanleitung Seite 15